Crane Safe Load Monitoring

Ready for delivery to an industry leading designer and manufacturer of onshore an offshore cranes are these 65kN rated load pins.

These ATEX/IECEx certified dual bridge load pins were manufactured for a customer that supplies crane monitoring and overload systems.

These IECEx load pins have been purchased by our US distributors, Interface, Inc for a customer that manufactures marine and offshore cranes and winches.

These three stainless steel annular load cells have been designed to fit the main hoist of a crane to provide load measuring data.

We have recently designed and manufactured 16 stainless steel tension load cells for our US distributor, Interface Force Measurement Solutions. They will ultimately be going to a marine crane and winch manufacturer.

Designed and manufactured for one of our regular customers that specialises in crane rental and heavy lifting applications were these 1750 tonne rated load pins.

Designed and manufactured for a customer in the USA, these Y stainless steel load links will be used to provide load monitoring on a ship deck crane.

We have just despatched these 250 tonne ATEX/IECEx load shackles to a UK customer that specialises in the design of safety and control solutions.

We have recently supplied this STA-3 1000kg rated load cell to a UK customer in the space industry that specialises in satellite-based systems. They will be installing it on a ceiling crane in their manufacturing facility.

Recently despatched and on their way to Chile are these two 100 tonne rated load measuring pins that will be installed in a crane to provide load monitoring.

These 80kN wireless load pins have been designed and manufactured for a customer in Belgium, who wanted to replace an existing load bearing pin in an open wedge socket with a load measuring pin to provide load monitoring.

Due for delivery early next week to a customer in Belgium are these four duplex load links rated to 400 tonnes. Each load link pair has a separate strain gauge bridge to give dual redundancy for additional safety protection and provides a 4-20mA output.

LCM System have designed and manufactured a 10,400kN (1060 tonne) load pin that will be installed in an offshore A-Frame crane to provide load monitoring during lifting operations.

Manufactured for a customer in Canada was this 120 klbf (53.4 tonne) stainless steel load pin which will be installed in a crane for overload monitoring.

Just completed an on their way to our customer are these two 7.5te rated load pins.

Today we despatched a 50te load pin that will be installed in a crane sheave.

On route to one of our Belgian customers are these 10 x 270te dual bridge load links.

Manufactured for one of our regular customers and leaving the factory this week is a 120 klbf (5.4 tonne) load pin which has a very large diameter in comparison to its load capacity.

Two 35te capacity custom designed compression load cells are ready for despatch and will soon be installed in the jib extension hooks of an A-frame floating crane.

Leaving the factory tomorrow are 5 of our TELSHACK-B 150te telemetry load shackles.